C.H. BALACHAND1*, B. SHRIDAR2
1Department of Agricultural Engineering, S.V. Agricultural College, Tirupati, 517 502, Acharya NG Ranga Agricultural University, Guntur, 522509, Andhra Pradesh
2Agricultural Machinery Research Center, Tamil Nadu Agricultural University, Coimbatore, 641003, Tamil Nadu, India
* Corresponding Author : chbalachand@rediffmail.com
Received : 01-10-2016 Accepted : 08-10-2016 Published : 01-11-2016
Volume : 8 Issue : 53 Pages : 2800 - 2802
Int J Agr Sci 8.53 (2016):2800-2802
Keywords : Spray Pattern, Patternator, Nozzle Position and Knapsack Mist Blower
Academic Editor : Basavaraj Patil
Conflict of Interest : None declared
Acknowledgements/Funding : None declared
Author Contribution : None declared
A spray pattern analysis system was developed to assess quantitatively the incremental liquid application rates from ground application equipment. The spray pattern was evaluated by using patternator constructed confirming to specification of ISO 10064. The patternator was made by 30 number of channels each 7.5 cm width at the top and 2 cm depth. The motorized knapsack mist blower was placed at one side of the corrugated sheet in such a way that the corrugations were perpendicular to the nozzle position. Beakers were kept below the corrugations for collecting the spray materials. The speed of the blower was measured with tachometer. The sprayer unit was placed at a distance of 1 m from the patternator. The engine speed was regulated by accelerator. The spray distribution pattern for motorized knapsack mist blower recorded maximum amount of 0.07 l min-1 spray liquid deposited at 5500 rpm engine speed at 6.0 mm orifice diameter.